Nederman

High Vacuum Valves, TAV 50

High Vacuum Valves, TAV 50

Maximize the efficiency of your high vacuum system with automatic valve.

The TAV 50 automatic valves maximize the efficiency of your high vacuum system. Because the valves can be opened and closed automatically, the vacuum is always concentrated on the connections, extraction points or machines in operation at the time. This maximizes the power of extraction, produces lower operating costs and minimizes the size of the vacuum unit.



Description of ATEX versions

Depending on the variant and the application area, many of the TAV 50 units are marked according to the ATEX Directive with the EX symbol and equipment category. All TAV 50 variants with the EX symbol are category 3D equipment according to Directive 2014/34/EC. That means that these variants can be placed in zone 22 pursuant to Directive 1999/92/EC. The manually controlled TAV 50 MA is suitable for installation within the classified area (zone 22) even though it is not marked with the EX symbol. Manually controlled equipment does not fall under Directive 2014/34/EC (ATEX), so this valve is not marked with Other valves without the EX symbol (W, G and AC/DC valves) are not suitable for ATEX and so should not be installed within the classified area. See table of part numbers below, where EX is included in the name, to see which are suitable for the classified area.the EX symbol.

  • Lower operating costs and smaller vacuum equipment
  • Lower noise level on the premises
  • Conductive plastic material

Technical data
Certifications CE, EX
Standard Designed for ISO 21904 compliance
Installation Indoor
Material Conductive plastic
Max vacuum (psi) 50
Operating temperature range 0° to +40°C (32 F to 104 F)
Diameter (in) 51
Length (ft) 51

Models14

Accessories for this product 15

AS-set microswitch P
ArtNo: 40141550

AS-set microswitch P

AS-set microswitch A
ArtNo: 40141760

AS-set microswitch A

Flow sensing valve P low flow
ArtNo: 40146252

Flow sensing valve P low flow

Activator
ArtNo: 40190010

Activator

TAV 50 Mounting kit
ArtNo: 40375151

TAV 50 Mounting kit

Pneu. activator kit for TAV50
ArtNo: 40377160

Pneu. activator kit for TAV50

Choke valve for delayed closure of TAV 50 MV valves. Max. delay: 3 seconds, M5 thread.
ArtNo: 40617520

Restrictor M5

Choke valve for delayed closure of TAV 50 FV and TAV 50 FV/MV valves. Max. delay: 10 seconds, G1/8" thread.
ArtNo: 40617910

Restrict./non return valve1/8kit

Hose (25m), PVC, for compressed air
ArtNo: 40650021

Tube 25m 6/4 plastic blue

3-Port valve. 3/2-port pneumatic control valve (rocker) for control of single-action cylinder. Suitable for TAV 50 PC. Set includes couplings and hose (6/4 mm, 25 m).
ArtNo: 40680280

Maneuvering kit TAV50 tilt

Junction box strain relif
ArtNo: 40720010

Junction box strain relif

Junction box
ArtNo: 40720830

Junction box

Wire Connector 2,5 mm2, 1-pole.
ArtNo: 40730170

Konex clip

Pilot cable 2x0,75mm2 PVC L=100m
ArtNo: 40730403

Pilot cable 2x0,75mm2 PVC L=100m

Pilot cable 3x0,75mm2 PVC L=100m
ArtNo: 40730404

Pilot cable 3x0,75mm2 PVC L=100m