BenchTop Extraction Arm FX2 50 Original

The best and most cost-efficient solution for applications where small, flexible and easy-to-use arms are required.

Nederman FX2 arms are made of lightweight anodized aluminium sections, with two or three adjustable, composite friction joints. Offering strength and durability combined with easy handling, they can be used in many types of environment. They are especially suitable for applications where small, flexible and easy-to-use arms are required.
A robust and reliable all-round arm for general applications where there is little risk of electrical discharges or attack by aggressive chemicals.

  • Optimal efficiency and low noise provides safe and quiet working environment
  • Ceilings, walls and floors or fixed to worktops mountings and cut2fit extension profile gives maximum installation flexibility
  • The two outermost arm joints can rotate and swivel through 360°, which gives the unique maneuverability
  • The lean, smooth and aesthetic design allows arms to fit in well in any environment without compromising its durability and reliability
  • Highly integrated products that save customers’ time and costs, as well as providing the reliability and functionality to deliver a better performance

Technical data
Certifications CE
Noise level (dB(A)) 60 dB(A) at 110 m3/h
Installation Indoor
Material Tubes in anodizied aluminium. Joints in PP plastic. Duct connectors in EPDM rubber. Minihood in PP plastic.
Fume temperature max 70°C
Extraction arm diameter (mm) 50
Airflow (m³/h) 50 - 110
Colour Aluminum and white

Accessories for this product 20

FX-Cut2fit extension-L2200
ArtNo: 70374600

FX-Cut2fit extension-L2200.

FX-Dome hood-ORIGINAL-D50/75/100
ArtNo: 70376982

FX-Dome hood-ORIGINAL-D50/75/100. Transparent dome hood, made of PET-G plastic, is designed to capture high dispersion contaminants. It can be attached directly on minihood, irrespective of arm size. The ergonomics of handle design on both sides of the hood make it easier to maneuver.

FX2-Duct connector-ORIG/CHEM-D50
ArtNo: 70377036

FX2-Duct connector-ORIG/CHEM-D50.

FX2-Duct connector-ORIG/CHEM-D75
ArtNo: 70377038

FX2-Duct connector-ORIG/CHEM-D75.

FFX2-Bracket kit-D50/75/100-L500
ArtNo: 70377042

FX2-Bracket kit-D50/75/100-L500. Complete mounting kit, with the classic bracket, 500mm (19.68 inch) extension profile and associated parts, for mounting FX2 50/75/100 arms on the ceiling .

FX2-Wall BRKT kit-Flat-L190-White
ArtNo: 70377043

FX2-Wall BRKT kit-Flat-L190-White. Complete mounting kit, with flat wall bracket,190 mm (7.48 inch) extension profile and associated parts, for mounting FX2 50/75/100 arms with 250mm from the vertical centre line of the arm to the wall.

FX2-Ceiling cover plate-PLUS
ArtNo: 70377045

FX2-Ceiling cover plate-PLUS,

FX2-Wall-P BRKT kit-D50/75/100-L190
ArtNo: 70377046

FX2-Wall-P BRKT kit-D50/75/100-L190. Complete mounting kit for mounting FX2 50/75/100 plus arms with 250 mm (9.84 inch) from the vertical centre line of the arm to the wall.

FX2-Al duct-L1000-D50toD77
ArtNo: 70377056

FX2-Al duct-L1000-D50toD77. Aluminum duct with 77 mm ( 3 inch) diameter and 1000 mm (39.37 inch) length is designed to replace vertical ventilation duct above the swivel of FX2 50 arm. This is a good looking alternative to standard, ventilation duct.

FX2-Al duct-L2000-D50toD77
ArtNo: 70377057

FX2-Al duct-L2000-D50toD77. Aluminum duct with 77 mm (3 inch) diameter and 2000 mm (78.74 inch) length is designed to replace vertical ventilation duct above the swivel of FX2 50 arm. This is a good looking alternative to standard, ventilation duct.

FX2-Hose support ring-D75
ArtNo: 70377067

FX2-Hose support ring-D75. Place into the 75 mm (3 inch) hose to support the connection between the hose and the duct connector of the arm.

FX-Hose-D75-L3000-Grey
ArtNo: 70377098

FX-Hose-D75-L3000-Grey Flexible hose in grey PVC with 75 mm (3 inch) diameter and 3000 mm (118.11 inch) length. It shall be used with hose support ring to connect hose to arm.

FX-Combi hood-ORIGINAL-D50/75/100
ArtNo: 70500144

FX-Combi hood-ORIGINAL-D50/75/100.

FX-Metal hood-ORIG/CHEM-D50/75/100
ArtNo: 70500444

FX-Metal hood-ORIG/CHEM-D50/75/100.

FX-Bracket kit-D50/75/100-L190
ArtNo: 70501144

FX-Bracket kit-D50/75/100-L190

FX-Classic bracket-D50/75/100
ArtNo: 70501244

FX-Classic bracket-D50/75/100

FX-Cut2fit extension-L1100.
ArtNo: 70501344

FX-Cut2fit extension-L1100

FX2-Bench bracket kit-D50/75/100
ArtNo: 70501444

FX2-Bench bracket kit-D50/75/100

FX-Ceiling cover plate
ArtNo: 70502644

FX-Ceiling cover plate

FX-Flange hood-ORIGINAL-D50/75/100
ArtNo: 70502844

FX-Flange hood-ORIGINAL-D50/75/100