In Ground Exhaust Extraction System
In the “In-Ground” system the hose is pulled up from underground when used and pushed back under ground after the work is done. In-ground systems are especially suitable for new vehicle repair shops that is still on the planning stage, so there is a possibility to design the in ground pipe work.There are two types of inground systems - ”On- floor” system and ”Under- floor” systems.On- floor” systemIn the ”On- floor” system a lid in the floor is opened and a hose-kit is attached to the extraction outlet when used. After the work is done, the hose is removed to its storing place and the lid is put back in closed position. Any standard Nederman nozzle and hose can be selected up to Ø200 mm.“Under-floor” systems In the “Under floor” system the hose is pulled up from under ground when used and pushed back under ground after the work is done. A limited range of hoses and nozzles available.NB! An ”under floor” system must be sized for additional fan capacity since the hose and underfloor pipe doesn’t seal completley.
-
Out of sight when not used
-
Up to Ø100 (4”) hose – for passenger cars /LCV
-
Full range of hoses and nozzles for on Floor systems
Under Floor Kit of; exhaust hose, ø75mm 2,5m, rub
Hose connection Diameter (mm)
75
Note
Hose kits for ”Under-floor” system
includes safety belt and safety hook.
Under Floor Kit of; exhaust hose ø100mm 2,5m, rub
Hose connection Diameter (mm)
100
Note
Hose kits for ”Under-floor” system
includes safety belt and safety hook.
On/Under Floor outlet 240x240mm, ø150-155 op
On Floor outlet 300x300mm, ø200 openin
Under Floor Connection bend ø150mm, 45°
On floor Connection pipe ø150mm, vertical
On floor Connection pipe ø200mm, vertical
On floor Protection grid ø125-150
On floor Protection grid ø200
On floor Outlet tube ø150, for hose ø100mm
On floor Outlet tube ø150, for hose ø125mm
On floor Outlet tube ø150, for hose ø150mm
On floor Outlet tube ø200, for hose ø125mm
On floor Outlet tube ø200, for hose ø150mm
On floor Outlet tube ø200, for hose ø200mm