BenchTop Extraction Arm FX2 75 ESD/EX
The best and most cost-efficient solution for extraction of hazardous airborne contaminants, in applications where small, flexible and easy-to-use arms are required.
Nederman FX2 arms are made of lightweight anodized aluminium sections, with two or three adjustable, composite friction joints. Offering strength and durability combined with easy handling, they can be used in many types of environment. They are especially suitable for applications where small, flexible and easy-to-use arms are required.The arm is designed for use in electronic environments where there is a risk of electrostatic discharges. The ESD/EX can also be used for certain applications in potentially explosive atmospheres. Recommended for use in zone 1, 2 and 21, 22.
-
Optimal efficiency and low noise provides safe and quiet working environment
-
Ceilings, walls and floors or fixed to worktops mountings and cut2fit extension profile gives maximum installation flexibility
-
The two outermost arm joints can rotate and swivel through 360°, which gives the unique maneuverability
-
The lean, smooth and aesthetic design allows arms to fit in well in any environment without compromising its durability and reliability
-
Highly integrated products that save customers’ time and costs, as well as providing the reliability and functionality to deliver a better performance
Certifications |
ESD, CE, EX |
Noise level (dB(A)) |
58 dB(A) at 140 cfm |
Installation |
Indoor |
Material |
Tubes in anodized aluminium.
Joints in conductive PP plastic.
Duct connector in conductive EPDM rubber.
Minihood in conductive PP plastic. |
Fume temperature |
max 70°C |
Extraction arm diameter (in) |
3 in. |
Airflow (CFM) |
65 cfm - 150 cfm |
Colour |
Aluminum and black |
FX2-ESD/EX-D75-L1100-Up-Low
FX2-ESD/EX-D75-L1100-Down-Low
FX2-ESD/EX-D75-L1500-Up-Low
FX2-ESD/EX-D75-L1500-Down-Low
ArtNo: 70374600
FX-Cut2fit extension-L2200.
|
ArtNo: 70376983
FX-Dome hood-ESD/EX-D50/75/100
|
ArtNo: 70377039
FX2-Duct connector-ESD/EX-D75
|
ArtNo: 70377041
FX2-Duct connector-ESD/EX-D100
|
ArtNo: 70377042
FX2-Bracket kit-D50/75/100-L500.
Complete mounting kit, with the classic bracket, 500mm (19.68 inch) extension profile and associated parts, for mounting FFX2 50/75/100 arms on the ceiling.
|
ArtNo: 70377044
FX2-Wall BRKT kit-Flat-L190-Black
|
ArtNo: 70377045
FX2-Ceiling cover plate-PLUS,
|
ArtNo: 70377058
FX2-Al duct-L1000-D75/100toD100
|
ArtNo: 70377059
FX2-Al duct-L2000-D75/100toD100
|
ArtNo: 70377067
FX2-Hose support ring-D75. Place into the 75 mm (3 inch) hose to support the connection between the hose and the duct connector of the arm.
|
ArtNo: 70377068
FX2-Hose support ring-D100
|
ArtNo: 70377101
FX-Hose-ESD-D75-L3000-Black
|
ArtNo: 70377102
FX-Hose-ESD-D100-L3000-Black
|
ArtNo: 70500244
FX-Dome hood-ORIGINAL-D50/75/100
|
ArtNo: 70500544
FX-Metal hood-ESD/EX-D50/75/100
|
ArtNo: 70501144
FX-Bracket kit-D50/75/100-L190
|
ArtNo: 70501244
FX-Classic bracket-D50/75/100
|
ArtNo: 70501344
FX-Cut2fit extension-L1100
|
ArtNo: 70501444
FX2-Bench bracket kit-D50/75/100
|
ArtNo: 70502644
FX-Ceiling cover plate
|
ArtNo: 70502944
FX-Flange hood-ESD/EX-D50/75/100
|