Inline Spark Trap

Complementary fire prevention for a dust collection system

Installed in ducting as part of a dust collection system, the Inline Spark Trap greatly reduces the possibility of fire in cyclones / collectors by decreasing the number of sparks which could reach the cyclone or collector through the ductwork.

The spark trap’s effectiveness is based on a simple principle - disrupting the laminar airflow to cause sparks to cool and extinguish before they can enter a cyclone / collector. There are no moving parts and no power is required for operation.

QuickFit (QF) clamptogether ducting eliminates rivets, screws, and welding, significantly reducing the time required to install or replace ducting. The Inline Spark Trap can quickly and easily be mounted into QuickFit ducting systems, or other
duct systems with use of an adapter, and the trap can easily be removed for cleanout. Calibration or other assistance from a factory technician is not required.

It must be mounted in a horizontal position.
The duct distance recommended: At least ten diameters from cyclone / collector
Velocity: 8 m/s - 25 m/s

The Inline Spark Trap is not a replacement for spark detection or explosion isolation systems. It is a complementary device only.

  • Simple, economical fire protection
  • Quick, easy installation and cleanout

Caractéristiques techniques
Fin Type A QF
    Spark Trap InLine Galv 0,7mm 100QF

    ArtNo: 8210001264

    Material Thickness
    0,7mm
    Diamètre A (mm)
    100
    Longueur (mm)
    466
    Largeur (mm)
    180
    Poids
    2,8
    Spark Trap InLine Galv 0,7mm 125QF

    ArtNo: 8210001265

    Material Thickness
    0,7mm
    Diamètre A (mm)
    125
    Longueur (mm)
    504
    Largeur (mm)
    224
    Poids
    3,2
    Spark Trap InLine Galv 0,7mm 160QF

    ArtNo: 8210001266

    Material Thickness
    0,7mm
    Diamètre A (mm)
    160
    Longueur (mm)
    616
    Largeur (mm)
    315
    Poids
    3,8
    Spark Trap InLine Galv 0,7mm 200QF

    ArtNo: 8210001267

    Material Thickness
    0,7mm
    Diamètre A (mm)
    200
    Longueur (mm)
    606
    Largeur (mm)
    350
    Poids
    5
    Spark Trap InLine Galv 0,7mm 250QF

    ArtNo: 8210001268

    Material Thickness
    0,7mm
    Diamètre A (mm)
    250
    Longueur (mm)
    606
    Largeur (mm)
    400
    Poids
    7,1
    Spark Trap InLine Galv 0,7mm 315QF

    ArtNo: 8210001269

    Material Thickness
    0,7mm
    Diamètre A (mm)
    315
    Longueur (mm)
    676
    Largeur (mm)
    500
    Poids
    6,8
    Spark Trap InLine Galv 0,7mm 400QF

    ArtNo: 8210001270

    Material Thickness
    0,7mm
    Diamètre A (mm)
    400
    Longueur (mm)
    766
    Largeur (mm)
    630
    Poids
    7,3
    Spark Trap InLine Galv 0,9mm 450QF

    ArtNo: 8210001271

    Material Thickness
    0,9mm
    Diamètre A (mm)
    450
    Longueur (mm)
    826
    Largeur (mm)
    710
    Poids
    16
    Spark Trap InLine Galv 0,9mm 500QF

    ArtNo: 8210001272

    Material Thickness
    0,9mm
    Diamètre A (mm)
    500
    Longueur (mm)
    926
    Largeur (mm)
    810
    Poids
    22
    Spark Trap InLine Galv 0,9mm 560QF

    ArtNo: 8210001273

    Material Thickness
    0,9mm
    Diamètre A (mm)
    560
    Longueur (mm)
    1026
    Largeur (mm)
    920
    Poids
    26
    Spark Trap InLine Galv 0,9mm 630QF

    ArtNo: 8210001274

    Material Thickness
    0,9mm
    Diamètre A (mm)
    630
    Longueur (mm)
    1086
    Largeur (mm)
    1020
    Poids
    31
    Spark Trap InLine Galv 0,9mm 710QF

    ArtNo: 8210001275

    Material Thickness
    0,9mm
    Diamètre A (mm)
    710
    Longueur (mm)
    1186
    Largeur (mm)
    1150
    Poids
    35