FlexFilter 13 and 18 EX

The FlexFilter 13 and 18 EX are high vacuum filters used in applications with a working vacuum of max. 40.000 Pa (5,80 psi). The filter can be used in applications where there is a high content of explosive dust particles.

The FlexFilter 13 and 18 EX are high vacuum filters used in applications with a working vacuum of max. 40.000 Pa. The filter is made in galvanized steel sheet which makes it a very competitive alternative to other high vacuum filters. The FlexFilter 13 and 18 EX can be used in applications where there is a high content of explosive dust particles. The filter can be supplied with either antistatic cartridges (UniClean) or antistatic cassettes depending on the air flow, the dust type and the dust concentration. The FlexFilter 13 and 18 EX can be delivered in two different heights – type L and A. The Ex-vents 410x410 are supported on the back side to allow vacuum max 0,4 bar. The cartridges/cassettes are cleaned automatically by a high-efficiency, low energy consuming compressed air system activated by an integral electronic controller. The filter is easy to maintain due to the following features:

  • The FlexFilter 13 and 18 EX are high vacuum filters used in applications with a working vacuum of max. 40.000 Pa. The filter is made in galvanized steel sheet which makes it a very competitive alternative to other high vacuum filters. The FlexFilter 13 and 18 EX can be used in applications where there is a high content of explosive dust particles. The filter can be supplied with either antistatic cartridges (UniClean) or antistatic cassettes depending on the air flow, the dust type and the dust concentration. The FlexFilter 13 and 18 EX can be delivered in two different heights – type L and A. The Ex-vents 410x410 are supported on the back side to allow vacuum max 0,4 bar. The cartridges/cassettes are cleaned automatically by a high-efficiency, low energy consuming compressed air system activated by an integral electronic controller. The filter is easy to maintain due to the following features:
  • Inspection and change of the filter elements can take place within a few minutes
  • Inspection and change of the filter elements can take place within a few minutes

Technical data
Certifications CE, EX
Standard Designed for ISO 21904 compliance
Compressed air requirement 6 bar
Installation Indoor, Outdoor
Material Housing in galvanised steel sheet (4 mm)
Suitable for combustible dust Yes
Filter cleaning method Pulse jet
Application Dust
Working pressure (in. wg) Max. 40.000 Pa.(5.80 psi)
Dustbin volume (gal) 50 or 100, or whitout
Operating Temperature -4 to 167 F (-20 to 75 C)
    FlexFilter-13-C-L EX

    ArtNo: 13-C-L EX

    Number of filter elements
    8
    FlexFilter-13-C-A EX

    ArtNo: 13-C-A EX

    Number of filter elements
    8
    FlexFilter-18-C-L EX

    ArtNo: 18-C-L EX

    Number of filter elements
    16
    FlexFilter-18-C-A EX

    ArtNo: 18-C-A EX

    Number of filter elements
    16
    FlexFilter-13-K-L-4 EX

    ArtNo: 13-K-L-4 EX

    Number of filter elements
    2
    FlexFilter-13-K-L-6 EX

    ArtNo: 13-K-L-6 EX

    Number of filter elements
    2
    FlexFilter-18-K-L-4 EX

    ArtNo: 18-K-L-4 EX

    Number of filter elements
    4
    FlexFilter-18-K-L-6 EX

    ArtNo: 18-K-L-6 EX

    Number of filter elements
    4