FlexPAK DX

Frequency controlled compact high vacuum dust collector unit to be used for combustible dust applications. Typically 2-10 users.

The FlexPAK DX is a frequency controlled high vacuum dust collector for extraction of combustible dust. FlexPAK DX is suitable for cleaning the workplace, the shop floor and machines. It is also very suitable for on-tool applications. FlexPAK DX regulates the speed of the motor automatically depending on the vacuum demand. Compared to traditional controllers, FlexPAK DX provides an optimal, and well-balanced vacuum according to the need, ensuring energy-saving operation. The FlexPAK DX have different running modes to meet specific customer needs. The FlexPAK DX can easily switch between generating as much vacuum as possible, typically for applications with long piping or material transportation, or maintaining a constant vacuum level. There are 2 versions available, FlexPAK DX, equipped with a rupture disc for release of the explosion pressure and flame and FlexPAK DX F2 supplied with a flameless venting system that could be used indoors for some applications. Always reference the use in relation to product explosion properties and the extracted dust.

  • Easy to install
  • Built in PLC functions
  • Low operating cost
  • Reliable
  • Suitable for a wide range of applications

Caractéristiques techniques
Certifications CE, EX
Standard Designed for ISO 21904 compliance
Niveau sonore (dB(A)) 70
Classe de protection IP 42
Installation Intérieur, Extérieur
Matériel C2 according to ISO 12944-2
Convient pour les poussières combustibles Oui
Méthode de décolmatage Inversion de flux
Matériel recyclé (%) 93,6
Application Granulé, Abrasif, Fumée, Copeau, Poussière
Pression de fonctionnement (kPa) 20-35
Volume du seau (l) 70
Débit max (m3/h) 1300
Surface filtrante (m²) 6
Fréquence (Hz) 50/60
Nombre de phases 3
Type de filtre Filtre à manche
Nombre d'éléments filtrants 2
Compressed air requirement 6-7 bar
Max vaccum (kPa) 35
Inlet 150 mm
Poids (kg) 454
Note Filter elements - 2 (main and control filter)

Accessoires pour ce produit 9

Fire alarm complete.
ArtNo: 40116540

Firealarm filters complete. Activated when the temperature exeeds +140 Deg. C. If placed in EX zone, intrinsic safe circuit is required.

Conduite à bride Ø 150, 1 m
ArtNo: 40375263

Conduite à bride Ø 150, 1 m

Coude à bride 90º Ø 150
ArtNo: 40375264

Coude à bride 90º Ø 150

Commutateur de pression diff. 3-15 kPa NC
ArtNo: 40375273

Commutateur de pression diff. 3-15 kPa NC

Conduite à bride d150, 0,5m
ArtNo: 40376525

Conduite à bride d150, 0,5m

Coude à bride 45º Ø 150
ArtNo: 40376770

Coude à bride 45º Ø 150

Déflecteur 220x540
ArtNo: 40376771

Déflecteur 220x540