FibreDrain Oil Mist Filters

Oil mist almost always results in oily premises, equipment and products. Modern metalworking machinery is often controlled by sensitive electronics and production is lowered by unplanned disruptions – caused by contaminated circuit boards. Handling equipment and pieces of products coated in a thin film of oil is not an acceptable working practice and definitely not production-friendly. Removing oil mist is therefore essential for workplace safety and cleanliness. 

Problems surrounding oil mist

Oil mist affects the health of machine operators, disrupts production and settles everywhere in the area, resulting in slippery floors and work surfaces. Almost all machining operations create oil mist to some extent. Oil mist is the aerosol that is formed when oil is used for cooling or lubricating during the machining of metal and some plastic components. Oil smoke is formed when oil contacts the hot machined surface, vaporizes, and condenses as sub-micron particles.  

It is well known that prolonged and repeated exposure to oil products can be harmful to health, which means that good ventilation must be ensured under all working conditions. Oil emulsions normally contain 90-95% water and the remaining is soluble oil. The oil mist consists of aerosols from oil or oil/water emulsion. Mineral oil-based metalworking fluids are known as neat cutting oils or straight oils. Emulsions normally contain a number of undisclosed additives. 

Rock solid solutions for high-efficiency air filtration

Nederman solutions for oil mist filtration are designed for continuous operations in demanding airflow applications. Our unique FibreDrain^® technology ensures superior separation performance and long filter media life, thus minimizing your overall costs and ensuring total peace of mind. A wide range of filters is available, covering the entire spectrum from wet to medium wet and semi dry (MQL) and dry applications. 

Nederman oil mist filters feature a unique, specially treated fibre surface that allows the collected droplets to coalesce, grow in fibre intersections and finally drain by gravity out of the filter medium. This technology, called FibreDrain^® ensures superior efficiency even under the most challenging conditions in continuous operations.

The filters don’t absorb or get clogged by the oil. Instead, thanks to FibreDrain^®, the air is thoroughly cleaned and a maximum amount of coolant can be retrieved and reused. 

Nederman FibreDrain Oil Mist Filters Unique FibreDrain® technology ensures top performance in continuous operation  Exceptional fluid drainage capacity ensures maximum coolant retrieval and reduces coolant consumptionThe FibreDrain design secures long filter life and thus low operating cost Wide range of filter compositions to suit most applications Bespoke modular systems for large centralized systems Future-proof, can be adjusted to future parameters Our Nederman FibreDrain™ oil mist filters can be used for emulsion (oil mist), neat oil (oil smoke) and MQL applications.

How it works

Nederman FibreDrain^® oil mist solutions collect oil mist and oil smoke at the source, i.e. directly at the metalworking machine, either enclosed or open. The oil-laden air is passed through the layers of compressed filter media at low velocity.

The airstream enters at the bottom of the filter unit and passes upward through the filter cartridges. The filter stack is progressive in filtration properties, which means that the smaller the particle, the further it will penetrate the filters in the air flow direction. The captured mist drains from the filter surface by gravity down in the sump of the collector.

To learn more, watch this video. 

 

Contact our experts to find out more about our oil mist filtration solutions >>