PAK-M DX

Compact and power saving high vacuum unit with several options suitable for organic- or metal combustible dust. For 1-5 users.

The PAK-M DX is a frequency controlled high vacuum dust collector unit. It is designed for extraction of combustible dust from grinding or sanding (incl. on-tool extraction) as well as granulate, grit or swarf. PAK-M DX is also suitable for cleaning the workplace, shop floor or extraction directly from a production line. Typical areas of application can be found in construction or manufacturing industries, bakeries etc., generally serving up from 1 up to 5 simultaneous extraction points. There are two main versions available; PAK-M DX, equipped with a relief panel for release of the explosion pressure and flame or PAK-M DX equipped with a flameless venting system that could be used indoors with variants suited for organic or metallic dust respectively.

PAK-M DX controls the speed of the motor automatically using a VFD (Variable Frequency Drive) and dP-sensor to maintain a constant vacuum, selected by the user on the control panel - ideal for on-tool extraction but also ensuring minimum power consumption - saving typically 50% energy or more in comparison to units without a VFD. The PAK-M DX can also be set to generate as much vacuum as possible for applications with long piping, material transportation or cleaning. Automatic vacuum valves offer further energy savings by controlling the PAK-M DX to only provide suction when an operation is ongoing but can also be used to increase the number of working points if not all are used simultaneously.

The PAK-M DX is controlled by the VFD as standard but can be upgraded with a separate PLC for enhanced control- and sensor capabilities. The PAK-M DX is developed to fit into normally noise sensitive premises thanks to efficient silencers, acoustic enclosure and using the VFD to run at the lowest possible speed to needed to maintain the desired suction.

The PAK-M DX is offered with two filter options; an Antistatic Polyester filter with a Class M control filter or a high-efficiency PTFE filter with a H14 control filter for increased cleaning efficiency and longer filter life in more demanding applications. Running the cleaning cycle opens the filter cleaning valve and a powerful blast of reversed airflow is created, efficiently dislodging dust from the filter bags. Filter cleaning is initiated based on how much dust is loaded into the filter (on-demand, dP-controlled) or alternatively, timer based, ensuring minimum total number of cleaning cycles and thereby increasing filter life.

The vacuum unit, VAC-M is also sold separately for combination another dust separator than standard.

  • Low operating costs with energy saving VFD to maintain the desired vacuum level and 6 000 hours of filter life in most typical applications.
  • Low installation costs - unit complete with VFD as starter, control unit and for adjusting the desired vacuum level - no set-up is needed.
  • Efficient, dP-controlled or timer-based filter cleaning minimises number of cleaning cycles and gives longer filter life.
  • Low noise level with fan mounted in acoustic enclosure.
  • Designed for ATEX applications and built in safety functions including emergency stop, monitored control filter detecting main filter failure and monitored relief/venting system that vents an explosion to a safe area and stops the unit.

Technical data
Certifications CE, EX
Noise level (dB(A)) 70
Protection class IP54 (Dust separator IP65)
Compressed air consumption 700 N-Litres/min (25 cfm)
Installation Indoor
Suitable for combustible dust Yes
Filter cleaning method Reverse air pulse
Material recycling (% weight) 96 weight-%
Application Grit, Dust, Swarf, Granulate
Dustbin volume (l) 70
Filter Area (m²) 3.0
Power Voltage (V) 380-480
Frequency (Hz) 50/60
Filter type Bag
Number of filter elements 24
Compressed air requirement 6 - 10 bar (87 - 145 PSI)
Capacity (max airflow m3/h) 545 m3/h @ 15kPa, 475 m3/h @20kPa
Max vaccum (kPa) 21
Inlet 100 mm
Weight (kg) 378-393
Outlet 100 mm
Power (kW) 7,5 kW @50 Hz, 9 kW @60 Hz

Accessories for this product 21

Fire alarm complete.
ArtNo: 40116540

Firealarm filters complete. Activated when the temperature exeeds +140 Deg. C. If placed in EX zone, intrinsic safe circuit is required.

Switch disconnector MS6-KG64
ArtNo: 40122310

Switch disconnector MS6-KG64

Leg PAK-M DX
ArtNo: 40370030

Leg PAK-M DX

Advanced control box
ArtNo: 40370040

Advanced control box

VFD display extension
ArtNo: 40370060

VFD display extension

Main filter PAK-M DX antistatic
ArtNo: 40370070

Main filter PAK-M DX antistatic

Main filter PAK-M DX antistatic PTFE
ArtNo: 40370080

Main filter PAK-M DX antistatic PTFE

Microfilter D264x460 H14 A=5,18m2
ArtNo: 40370100

Microfilter D264x460 H14 A=5,18m2

Bin Level Iindicator (BLI) EX
ArtNo: 40375269

BLI (niveauindikator til spand) EX

Flanged pipe d100, 1m
ArtNo: 40376521

Flanged pipe d100, 1m

Flange pipe d100, 0,5m
ArtNo: 40376522

Flange pipe d100, 0,5m

Flanged bend 90 degr. d100
ArtNo: 40376523

Flanged bend 90 degr. d100

Deflector 220x540
ArtNo: 40376771

Deflector 220x540

Vibration Sens Kit FlexPAK (IOT)
ArtNo: 40377221

Vibration Sens Kit FlexPAK (IOT)

Flanged trans.pipe0,2m DN100 B-Flap
ArtNo: 40377307

Flanged trans.pipe0,2m DN100 B-Flap

Adapter flange/flange DN100 B-Flap
ArtNo: 40377308

Adapter flange/flange DN100 B-Flap

Compressed air filter
ArtNo: 40620360

Compressed air filter

Compressed air switch, 3 bar
ArtNo: 40620370

Compressed air switch, 3 bar

Mounting kit elec.box (PS)
ArtNo: 40903520

Mounting kit elec.box (PS)

Cartridge filter NEL20/21, L=470 A=5,4m² without perforated plate
ArtNo: 43130200

Cartridge filter D264x460 Class M A=5,4m2